4 checks to get your washing machine started with water running in.
When your washing machine won’t fill with water, you can probably solve the problem yourself in most cases. Generally, this is a simple laundry problem. Please follow the listed checks below:
Watch the video with the explanations for:
Before checking the water tap, switch off the washing machine and disconnect the appliance from power.
Check the water pressure directly from the tap using a bucket. Approximately 10 litres of water per minute should flow out of the tap when fully open.
Watch the video to see details. From minute 1:38 you will find instructions to check the water pressure.
Always make sure the door is firmly shut before starting a cycle.
You should hear an audible click to indicate this. Check that there are no clothes stuck between the door and the housing, that could be preventing the door from shutting properly, and be sure not to overfill the washing machine drum.
One more hint:
Some washing programmes e.g. with cottons, specifically detect the load level after the programme has started to calculate the optimum amount of water for washing. Detection can take up to 2 minutes and no water is added during this time. After this delay the water will run in.
After carrying out one or all of these actions, your washing machine should be filling with water.
If water is still not running in, you may need support by a Siemens service expert.
If you have followed the information above but you're still having problems with your Siemens washing machine, then you might want to have it checked out by a Siemens professional.
Check that there are no kinks in the cold water fill hose and the waste water hose by pulling the appliance out slightly and untwisting any visible kinks or bends in these hoses.
For more information on how to correctly install these two hoses follow the link below.
Check the water pressure directly from the tap using a bucket. Approximately 10 litres of water per minute should flow out of the tap when fully open to ensure that the washing machine will be filled with enough water.
Contact your fitter if the water pressure is too low.
For more information on how to ensure your washing machine is getting a water supply, watch the video.
At Siemens Home Appliances United Arab Emirates we want you to help us improve the products and services we offer you and, for that, we need to know your opinion. Can you help us answering this brief survey?
It will not take you more than a minute.
If you need any support, please contact us or call us at BSH 048030400.
Thank you
At Siemens Home Appliances United Arab Emirates we want you to help us improve the products and services we offer you and, for that, we need to know your opinion. Can you help us answering this brief survey?
It will not take you more than a minute.
If you need any support, please contact us or call us at BSH 048030400.
Thank you