Service programme. Follow the explanation if a service programme is mentioned on the display.

After certain time intervals, your appliance will recommend that you use the service programmes. Use the service programmes to clean your appliance thoroughly.

Depending on the water hardness and use of the appliance, the display will show the following messages after prior notification:

• Calc’nClean necessary. Please press menu for 3 sec.
• Please rinse milk system.
• Cleaning necessary. Please press menu for 3 sec.
• Descaling necessary. Please press menu for 3 sec.

Note:

• If you accidentally interrupt the service programme, you must reset it.
• You can combine the cleaning and descaling programmes using the Calc’nClean service.
• Clean your appliance with a soft damp cloth immediately after a service programme to remove any descaling solution residues and prevent corrosion.

Please select the topic you are interested in:

Rinse the milk system with water if necessary. The rinsing process takes approx. 1 minute.

Note: This programme requires the brewing unit to be clean.

• Press [menu] to open the menu.
• Use to select "Rinse milk system".
• Press [ok] to start the program.
• Empty, clean and re-connect the milk container.
• Place an empty glass under the outlet system and confirm. The program runs.
• Empty, clean and re-connect the milk container.
• Empty the glass. The program has finished.
• The appliance is ready for use again.

Tip: If you would like to clean the milk system particularly thoroughly, clean regularly by hand.